How many tons of infield mix do I need?
Table of Contents
Typical Infield Mixes
With most infield mixes, the recommendation for Turface® incorporation is about one ton (roughly 40 bags) of product per 1,000 square feet of skinned area. This results in approximately 10 tons of Turface for a high school, college or professional field with 90 foot baselines and grass infield.
How deep should infield mix be?
” – 6”
Lucky Beaver Professional Infield Mix should be put down to a depth of 3” – 6” on a standard infield renovation. Once laid evenly, we suggest watering your infield with ½ inch of water, rolling it with a 1000 pound roller to achieve proper compaction, and then laser grading it out at 1/2%.
What is infield mix soil?
The infield mix is the soil used to build the skin surface of a baseball or softball field. Infield mixes are made up of three components: sand, silt, and clay. Sand is considered the largest soil particle in the infield mix. It helps create a strong infield by supplying structural integrity.
How much is a ton of infield mix?
Infield Mix – $36 a ton plus shipping — Bulldog Field Equipment.
What is the best dirt for a baseball infield?
The ideal dirt for recreational baseball and softball infields is composed of 70% sand and 30% silt and clay combined. Professional and collegiate level fields typically prefer 60% sand and 40% silt and clay.
How many yards of infield mix do I need?
Baseball – Skinned Infield Area & Infield Mix Needed
| Area of Skinned Infield | Dirt Needed for 1″ Depth | |
|---|---|---|
| 70′ Bases Grass Infield | 6,800 sq ft | 21 yds |
| 70′ Bases Skinned Infield | 10,700 sq ft | 33 yds |
| 60′ Bases Grass Infield | 3,850 sq ft | 12 yds |
| 60′ Bases Skinned Infield | 6,700 sq ft | 21 yds |
How do you make an infield mix?
Infield mixes should be in the following ranges of Sand/Silt/Clay, 60-70% sand, 15-25% Silt, 15-25% Clay. The silt to clay ratio can be . 5-1, determined by dividing the clay % into silt %. Particle size of sand is as important as the silt to clay ratio.
How do you harden infield dirt?
If your infield mix is too loose, you may need to add more clay to the infield mix. Perform a sand, silt and clay analysis of your infield mix to understand the proportions in your mix (see “What is an Infield Mix?” section below).
What is infield mix made of?
The infield mix—what most of us would think of as just dirt—is made up of a very precise combination of sand, silt, and clay, and comes in a variety of colors and compositions depending on the performance required and the cost.
How do you mix infield dirt?
Smart Turf: How to Add Infield Mix – YouTube
Why is the infield watered?
Not enough moisture will lead to cracking, too much moisture will lead to a wet tacky ball field. So we have to manage the moisture content in our clays daily. Management of ballfield clay moisture content is done by hand watering on the infield clays or by tarps on the mound and home plate.
How do you soften infield dirt?
Option 2: Fill a straight sided jar half full of your infield mix. Fill with water and shake vigorously until the soil is suspended in the water. Set aside and let it stand until the mix has fully settled. This will take from 1 hour to overnight.
How do you add an infield mix?
How do I make my infield dirt softer?
How do you fix a hard infield?
If the skinned area is too hard, wet the area down thoroughly with a hand-held hose and allow to soak in. When it is dry enough to get on the surface with an infield groomer, nail drag the skinned area in several directions. Add weight to the drag for added aggressiveness. Then mat drag to smooth the surface.
How do you soften a baseball infield?
FIELD READY IN ONE DAY…HOW TO BREAK IN A BASEBALL GLOVE IN …